5-Shelf Utility Truck:
All-welded, 13-gauge steel construction provides this unit with industrial strength, while a furniture-grade gray enamel finish makes it attractive enough to use in virtually any environment. Each shelf features a 11/2� lip to help secure parts and supplies during transport. Shelves are available with lips turned up or down. The 54�-high version handles up to 800-lbs., rolls smoothly over most surfaces on 5� molded-on rubber casters, and has a 10� clearance between shelves. The 66�-high
truck rolls on 8� phenolic casters, has a 3,000-lb. capacity, and 12� of clearance between shelves

2-Sided Stock Truck:
This all-welded stock truck is crafted of a 11/2� angle-iron frame, and heavy-duty 13-ga. steel sides and shelving. The truck stands 52� high above the deck with 17� of spacing between each shelf, and comes in a variety of widths. 800-lb. capacity trucks roll smoothly on 5� molded-on casters, while 2,000-lb. capacity trucks are mounted with 8� molded-on casters.

Low Deck Stock Trucks:
Low Deck Stock Trucks are ergonomically designed to aid in handling continuous workloads. Constructed of heavy 11/2� angle iron frame and 13-ga. steel. Easily handles up to 800 lbs., and rolls smoothly two swivel and two rigid 5� molded-on casters. Baked-on gray enamel finish. Arrives assembled and ready to use.

Mesh Security Truck:
This all-welded Mesh Security Truck is perfect for
transport, delivery and storage of valuable items large and small. The truck is constructed of heavy-duty angle iron frame and flattened expanded mesh. Doors are fastened with full-length piano hinges and equipped with a three-point locking system. Unit is finished in furniture-grade, baked-on gray enamel, and has a writing surface on the side for convenient grease-pencil messaging. Unit stands 72� high and comes in a variety of widths and depths to meet your storage and delivery needs. The truck handles up to 2500 lbs., and rolls easily over a variety of surfaces on 6� x 2� phenolic casters. Ships completely assembled and ready to use.

3-Sided Open Shelf Truck:
All-welded unit is constructed of 1� OD tubing and 1/2� rod sides. 13-ga. steel shelving slopes from front to rear to aid in securing product in its place. Truck stands 61� high with 14� of clearance between shelves. The Open Shelf Truck easily handles up to 1,800 lbs. and rolls smoothly on 6� molded-on swivel casters. Finished in furniture-grade, baked on gray enamel, and ships fully assembled and ready to use.