Flame Retardant

Phone: 877-885-7527

Flame Retardant for Burlap & Other Materials. Our Pick for most all applications is FS I-DS, due to its versatility for interior and exterior application, variety of surfaces, and it's Class A Rating. However the other products have very unique characteristics so please review them or call for assistance

Flame Stop™ Fire Retardants for interior woods, exterior woods, and all types of fabrics for use in office buildings, nursing homes, apartments, hotels, restaurants, theatres, schools, churches, homes and all other areas where fire retardants can save lives and property.

These Flame Stop™ Fire Retardants are pyrolytic formulations that prevent flame from spreading by developing a chemically self-extinguishing reaction. These products have been tested by United States Testing Company and Omega Point Labs in accordance with the various UL, ASTM, UBC & NFPA standards. We have also passed the 25.853 & 23.853 tests with the FAA agency.

Flame Stop™ products are economical to apply because they only require 1 application incorporating low pressure spray equipment in comparison with most fire retardants that require 2 or 3 applications with high pressure equipment. Please remember Flame Stop™ Fire Retardant products are shipped ready to use with no additional mixing needed. Our products guarantee the highest quality fire suppression protection available in the fire retardant industry today. For further information about our retardant products please select one of the following products:

All of our flame retardants are non-toxic, non halogenated, contain no form of bromine; the do contain mold and mildew inhibitors which are effective against black mold.

View Cart/Checkout

(Click Here for other applications)

Item Name: Flame Stop 1
Item Number: BPC-FS1
Price: $42.50

Or call to order 877-885-7527

Flame Stop I™ a universal fire retardant for most interior porous celluloid usage. Its surfactants allow it to penetrate and become part of the structure. Therefore, it provides the maximum wear and durability.

Flame Stop 1™ a flame retardant, is a pyrolytic formulations that prevent flame from spreading by developing a chemically self-extinguishing reaction. These products have been tested by United States Testing Company and Omega Point Labs in accordance with the various UL, ASTM, UBC & NFPA standards. We have also passed the 25.853 & 23.853 tests with the FAA agency.

Our flame retardant products are economical to apply because they only require 1 application incorporating low pressure spray equipment in comparison with most fire retardants that require 2 or 3 applications with high pressure equipment. Please remember Flame Stop ™ products are shipped ready to use with no additional mixing needed. Our products guarantee the highest quality fire suppression protection available in the fire retardant industry today. For further information about our retardant products please select one of the following products:

Flame Stop I™ is useful on any absorptive interior wood surface. The material to be treated can either be dipped or sprayed with low pressure equipment. The surfactants included in the formulation allow as much as 3/8" penetration into a Douglas fir stud. It can be used on framing, decorative woods, fabrics, wallpaper and other celluloid products.

Basic Uses: Interior applications such as draperies, wall coverings, carpet, furniture, cotton muslin, paper, straw, cellulose products, most synthetics, redwood, cedar, Douglas fir. used widely in restaurants, hotels, hospitals, commercial & residential buildings
Description: Flame Stop I™ is a post-treatment indoor fire retardant. It dries clear. When used on porous wood such as Douglas Fir or Pine, it will provide a class B rating. It penetrates wood and becomes part of it's molecular structure. When the treated material is subjected to an open flame, the retardant will pyrolitically self-extinguish fire with a minimum of smoke. It is completely non-toxic and non-hazardous to the environment and simple to apply
Advantages:
Since it becomes part of the substrate, the life of the flame retardancy is indefinite as long as the fabrics are not washed, however they can be dry cleaned up to 20 times
Flame Stop I™ will not deteriorate as it penetrates and becomes part of most materials.
It will not alter the structural integrity of the wood or substrata.
Non toxic, dries clear, easy to apply and create a flame retardant fabric
Limitations: Do Not Dilute. Storage range: 110 degrees F to 45 degrees F. Shelf Life: 3 years if kept within the storage temperatures
Applicable Standards: ASTM E-84, NFPA 255, UL 723 U>S> Testing #LA62192, CA Reg #C-14401 NFPA 701. Flamespread 35 and Smoke Developed 15 on Wood
Application: Flame Stop I™ ( flame retardant spray ) can be applied as is by spraying or immersing. In order to be effective there must be a 2-5% increase in the weight of the fabric, if material is synthetic such as Nylon a heavier coat may be needed. Since all fabrics have a different density a small test (butane lighter) should be performed. Hold a 4" x 12" piece of treated material vertically and apply a flame to the lower portion for 10 seconds, remove the ignition source. the flame must go out within 2 seconds.
Warranty: This product is sold on the condition that the user will evaluate the suitability for their purpose.

Technical Specifications
Coverage	Approximately 200 Square Feet
Total Solids	10%
Weight / Gallon	9 lbs.
Average pH	5.0
Color	Clear
Solvents	Water
Bacterial	Good Resistance
Fungus	Good resistance
Volatility	None
Toxic	No
Biodegradable	Yes
Corrosive	Mildly corrosive on unplated steel
Linear Shrinkage	Non
Insects, Rodents, Mold	Excellent resistance
Item Name: Flame Stop 1 Item Number: BPC-FS1 Price: $42.50 Or call to order 877-885-7527 Back to top Or call to order 877-885-7527
We have additional Flame Retardants for other applications. Flame Stop II™ has been formulated for outdoor applications. This chemical contains polymers and surfactants that allow it not only to penetrate a wood surface, but also create a watertight adhesion bond. Flame Stop II™ contains additives that seals the active fire retardant chemicals. FS II not only retards the material being treated, but adds weather-resistance. Flame Stop II™ has a tendency to bring out the natural beauty of the wood surface whether it be shingles or other exterior wood products. The weather resistance is accomplished because after the product is allowed to cure it becomes insoluble. Flame Stop II™ can also be applied to various types of fabrics that are used for exterior purposes such as awnings, stage decorations, costumes, etc. It also works very well on decor thatching, wood stage props, hay barriers, hula skirts and any other porous cellulose material. Tested by US Testing Co. No. (LA62466). Flame Stop II™ is a wood preservative for Cedar Shake Shingles. Apply at the rate of 200 square feet per gallon Click Here for Data Sheet in Adobe PDF Item Name: Flame Stop II Item Number: FS-II Price: $42.50 Quantity: Or call to order 877-885-7527 Flame Stop III™ is one of the most unique fire retardants available on the market today. It can be mixed with any latex paint or latex base stains. It requires no seal coat or precoat as do most other fire retardant paint systems. It has an indefinite shelf life as do most other systems and since it is not premixed with the paint, it allows for an unlimited selection of colors and an extensive choice of paint brands. Just one application of Flame Stop III™ will provide a Class A fire rating. The mixture is 16 ounces of Flame Stop III ™ (as it comes in the container) per 1 gallon of paint. Mix thoroughly and apply according to the instructions of the paint manufacturer. In most cases, the mixture will become thicker than desired and will require approximately 1-2 pint of water to be added, therefore, it can be said that Flame Stop III is also useful as a paint extender. If Flame Stop III has been stored in a cool area (less than 60 degrees Fahrenheit), it may be necessary to pour hot tap water over the Flame Stop III™ container in order to facilitate the mixing. Item Name: Flame Stop III Item Number: FS-III Price: $42.50 Or call to order 877-885-7527 Flame Stop I-DS™ is a pyrolitic formulation that prevents the spread of flame by developing a chemically self extinguishing reaction. Flame Stop I-DS™ is a clear penetrating chemical. Flame Stop I-DS™ is recommended for use on various substrates such as thatching, mulch, bamboo, foam rubber, open cell and closed cell foam rubber, nylon netting, exterior composition siding and many other difficult to treat materials. This product is a Class A rated fire retardant and can be used for exterior or interior purposes at the rate of 200 square feet per gallon. This is OUR PICK for most all applications. It can be applied by either dipping or spraying and can be top coated with any latex paint system. Item Name: Flame Stop I-DS Item Number: FS-I-DS Price: $42.50 Quantity: Or call to order 877-885-7527 View Cart/Checkout Call for additional information: 877-885-7527