To Static Control Products ESD Products Catalog
 | STATICO READY TO USE (or as a concentrate) TOPICAL ANTISTAT-EFFECTIVE CLEANER-DUST ELIMINATOR STATICO has been formulated to eliminate static charges and prevent buildup of triboelectric charges by providing surface conductivity on non-conductive surfaces for extended periods of time. Independent Laboratories have tested STATICO under the most stringent conditions. These tests were conducted at 72° F and 12% relative humidity. STATICO exceeds the standards set forth in MILB-81705B, ASTM-D-257-80, Electronic Industry lS 5. TEST RESULTS AVAILABLE UPON REQUEST. By spraying, dipping, wiping or damp mopping almost any surface can be static free. Because STATICO contains no solvents or abrasives and is non-flammable it can be used on any surface not affected by water. Also available in economical concentrate. |
STATICO SPECIFICATIONS
TYPE:High molecular weight topical antistat, water base
APPEARANCE:clear liquid
FLASH POINT:none
EXPLOSION HAZARD:none
SPECIFIC GRAVITY:1.00 @ 60deg/60degF
WEIGHT:1 gal=8.33 lbs
ODOR:none
pH:Use dilution 7.71
STATIC DECAY RATE-seconds:0.01 Sec + 5.0KV
REL HUMIDITY:12%, 72F
CONDUCTIVITY:static dissipative
CONCENTRATE DILUTION:1 oz. to 32 oz., 4oz. to 1 gallon
Down Load This Product Literature in Adobe PDF Click Here
| STATICO #2 TOPICAL ANTISTAT FOR FOOD CONTACT AREAS STATICO #2 offers both static control and food contact certification. *Meets FDA Title 21, par. 178.3130 for N,N-Bis (2 hydroxyethyl) dodecanamide, an antistatic agent intended for contact with honey, chocolate, liquid sweeteners, condiments, flavor extracts, and liquid flavor concentrates, grated cheese, light and heavy cream, yogurt and any food type that is a dry solid with the surface containing no free fat or oil. *Safe and effective for housewares applications: polyethylene and/or polypropylene straws and polystyrene cup. *Does not affect polyethylene film quality or clarity at recommended dilution. January 2004. This item is being re-formulated and not currently available. | STATICO #2 SPECIFICATIONS TYPE:Topical antistat for food contact surfaces APPEARANCE:clear liquid SPECIFIC GRAVITY:0.99 BOILING POINT:212deg F FLASH POINT:none DECAY RATE:less than 1 second COVERAGE PER QUART:4000 sq.ft. CONDUCTIVITY:static dissipative
|
| STATICOTM AE TOPICAL ANTISTAT Formulated to eliminate static charges on carpets, upholstery and fabrics. Effectively prevents triboelectric charge buildup by increasing surface conductivity for an extended period of time. STATICO AE contains no solvents or abrasives and is non-flammable. Apply by spraying with a fine mist - do not soak. Heavy traffic areas may need treatment more often. | STATICO AE SPECIFICATIONS TYPE:water based topical antistat APPEARANCE:clear liquid FLASH POINT:none SPECIFIC GRAVITY:1.02 WEIGHT PER GALLON:8.34 ODOR:none pH:7.21 CONDUCTIVITY:static dissipative |
| ELIMSTAT® ATS Concentrated Topical Antistat-Prevents Dust Deposits-Controls Static Charges on Insulating Surfaces Water based ELIMSTAT ATS is formulated for use Where static electricity needs to be controlled. ELIMSTAT ATS will make any surface it is applied to static dissipative and eliminate static charges in static sensitive environments. By eliminating static charges and controlling static generation, nuisance problems such as static cling as well as problems associated with manufacturing plastics and damage to electronic components are overcome. ELIMSTAT ATS is supplied as a concentrate for economical use. Dilute to 8 ounces per gallon ol water for long term effectiveness. ELIMSTAT ATS is non-flammable and fully biodegradable. | ELIMSTAT®ATS SPECIFICATIONS TYPE:water based topical antistat APPEARANCE:clear liquid FLASH POINT:none SPECIFIC GRAVITY:1.04 WEIGHT PER GALLON:8.36 ODOR:none pH:7.8 CONDUCTIVITY:static dissipative |
