 | CONDUCTIVE CUSHION INSOLES Designed to fit ESD Type I & II and Conductive Type I footwear- boots, athletic shoes, even dress shoes - they deliver comfort and performance for anyone who spends time on their fact. Lightweight, durable RUBATEX® Conductive Rubber and covered with metalized polyester fabric. Conforms to ANSI Z41 Standard for Protective Footwear, 3/32" thick for steel toe footwear. One year unconditional guarantee, Cushions impact, Washable, Durable, and Comfortable. Insole material reads 300-500 ohms at 50 volts DC and 100- 300 ohms at 10 volts DC. |
| CONDUCTIVE RUBBER BOOT #1030 A protective CONDUCTIVE RUBBER BOOT to be worn directly over sock in static sensitive areas. Especially recommended for industrial spray paint booths and any static sensitive area. The CRB #1030 is waterproof and chemical resistant. It is designed with conductive sole and steel toe. Available in black and labeled Conductive BOOT SPECIFICATIONS LINING: Canvas UPPER: Rubber SIZE RANGE: 7-13 (Men's Whole Sizes) COLOR: Black CONDUCTIVITY: Less than 1 million ohms HEIGHT: 14 inches TOE: Steel Toe Cap WEIGHT: 5-6 pounds per pair |  |
 | CONDUCTIVE AND STATIC DISSIPATIVE FOOTWEAR We offer a full line of footwear for static control applications. High quality footwear is comfortable and offers complete protection against static generation. Steel toe and soft toe shoes and boots are available. Please call our toll tree number: 300-345-3443 for more information. |
CONDUCTIVE SHOE PLUGS
For those who think they will never find a conductive shoe that is as comfortable as your normal shoes, LEGGE offers a service to "convert" your shoes. LEGGE will make almost any style of shoe either static dissipative or conductive. Wear the shoes that have been rendered conductive and be as comfortable as ever. Utilizes a proven design with thousands of satisfactory conversions.
 | PALM-STAT Grounding device for spray paint operations. Controls Static Electricity during spray paint operations. Allows spray operator to wear conventional gloves as PALM-STAT fits over the glove and makes positive contact with the spray gun. Conductive neoprene is solvent resistant. Medium and large sizes available. No cords to ground, eliminating restrictions on the operator as well as safety hazards. |
| ALOE-STAT® CONDUCTIVE SKIN LOTION ALOE-STAT is a conductive skin treatment lotion, containing all the skin conditioning properties of natural aloe. The aloe plant is known for its unsurpassed quality as a skin conditioner, promoting healthy, silk like skin. It eliminates dryness and improves conductivity during contact with wrist straps. LEGGE uses no chemical additives to alter the natural properties of the aloe plant. ALOE-STAT contains no oils, glycols, glycerin sterates, alcohols, amines or fragrances. These additives can irritate the skin and block the conductivity of the skin. pH of this lotion was adjusted to the average pH of human skin. ALOE-STAT conductive lotion is formulated with a high content of aloe plant extract that is absorbed by the skin very rapidly and provides long lasting conductivity. There is no residue left on the skin, eliminating slippery and greasy hands. It is very cost effective, since only about half of the amount is needed for skin treatment, compared to other lotions on the market. ALOE-STAT SPECIFICATIONS APPEARANCE:Colorless* pH:6.2-6.5 ODOR:Pleasant Natural Aloe Plant Scent BOILING POINT:212o F CONDUCTIVITY:109 ohms (when dry on non conductive surface) VISCOSITY:1640 CPS (Brookfield Spindle #3 @ 20 RPM) FLAMMABILITY:Non-flammable SKIN ABSORBTION:Rapid and Complete OILY RESIDUE:None SOLVENTS:None *Possible slight color change is typical of natural plant extract. Color change does not effect the performance of the product. |  |
 | ESD AWARENESS LABELS LEGGE offers a peel off ESD Awareness label for use on ESD Shielding bags boxes or any other container which needs to be marked with the proper ESD symbol. |
| CONDUCTIVE FOAM Use as a protective media tar in-plant handling and external shipping of static sensitive devices. Two types are commonly used. CFC Cushioning is used where delicate components may be subject to shaking or rough handling during transit. The sponge like material withstands physical abuse while providing conductive packaging. Completely non-corrosive. CFSR loam is used for shunting the leads of integrated circuits. Equalizes potential between leads and other ICs to prevent static damage. Completely non-corrosive. Please call for a quote with quantity and size or see our price list. |  |
 | LAB COATS High quality, static dissipattive lab coats for static sensitive areas. Lab coats are available in Royal Blue, Petrol Blue, and White. Customs designs and Sizes from XS to 5XL ale available. LAB COAT SPECIFICATIONS CONTENT:97.4% Polyester, 2.6% Carbon Suffused Nylon TYPE:5 oz. Textured Polyester WARP: Knit constructed for maximum comfort and durability. SURFACE RESISTIVITY:2.0x105 ohms front, 5.0x105 ohms back DECAY:5000volts to 0 in less than 1 second. DURABILITY:No significant with repeated washes NON-LINTING:No steel or coton fibers |
