| CONDUCTIVE FOOTWEAR TESTER #SLTM-1 CHECK CONDUCTIVE FOOTWEAR AUTOMATICALLY Model #SLTM-I Conductive Footwear Tester automatically and accurately measures the exact amount of resistance in conductive footwear and body grounding devices, ensuring a static control environment. Our Model #SLTM-I is a quality electronic instrument, precisely built with heavy duty polished aluminum foot plates and designed to give years of dependable service. It is ideal for dangerous, potentially explosive areas or areas in the electronic industry where static can destroy sensitive components. Stand on the foot plates and the unit's direct-reading dial with graduated, color-coded scale indicates the exact amount of resistance. Shipped complete and ready to operate. Has 8 feet of 18-3 type SJ power cord that plugs into any grounded 120 volt AC power source. Also available in 220 volt and battery operated. This unit measures 17 x 12 inches and weighs less than 6 1/2 Ibs. All conductive footwear and body grounding devices, such as LEGSTATS, must be worn in pairs. |  |
 | FLOOR CONDUCTIVITY TESTER #LA-1 Easy-to-use meter developed for accurately testing the conductivity of floors and equipment. The LA- 1 must be used regularly to monitor proper conductivity with NFPA code # 99. Regular use of the LA-I will establish and maintain procedures for the proper maintenance of conductive floors, eliminate fire hazards, and provide a static free environment. *Available with AC power Supply or Hand Crank *Compact, lightweight and portable *Simple to use *Direct-Reading Dial with Color-Coded Scale *Various Meter Scales to choose from. The LA-I uses 500V DC to test the resistance (in ohms) between two points. (NFPA Code #99) The meter comes ready-to-use (tin foil must be applied to bottom of weights). Simply follow the instructions for use and instantly obtain an accurate measurement. |
 | WSLS-S6 WRIST STRAP AND FOOT GROUND TESTING DEVICE The LEGGE MODEL WSLS-S6 SERIES Wrist Strap and Leg Ground Tester is designed for the verification of personnel grounding devices under actual wearing conditions. The base of the WSLS-S6 has a conductive mat for footwear or leg ground testing. The WSLS-S6 can be conveniently placed so that the workers can check ground straps without interrupting their normal work day. The WSLS-S6 is supplied with a long life 9-volt battery and 120/9V AC adapter. |  |
*Low resistance warning buzzer and red LED to indicate unsafe resistance.
*"Good" green LED to indicate safe and adequate static dissipation to ground.
*Easily calibrated and traceable to National Bureau of Standards.
WT25 WRISTAT TESTER | The LEGGE MODEL WT25 WRISTAT Tester is designed to test the integrity of our WRISTAT in a fast, efficient and simple manner. All of the elements of the WRISTAT - continuity of the strap, integrity of the protective resistor, and satisfactory strap to skin contact - easily confirmed by pressing the top cover of the WT25. The operator (wearer) is tested for a resistance to ground of greater than 750K ohms and less than l0M or 100M ohms. The upper limit notifies you of an unacceptably high resistance value (ie: possible loss of effective dissipation) and the lower limit warns of unsafe low resistance (possible risk of electric shock from surrounding motors, live wires, etc.) Model WT 25-4145.26 is available to comply with DOD HDBK 4145.26. The lower limit is set at 250K and the upper limit is set at 1 MEG (switchable to 10 MEG). Tests are performed in the same manner as the WT 25. |
| WL MIDGET- SURFACE RESISTANCE METER The WL MIDGET pocket surface resistivity meter is designed for optimum portability. This tester may be used for spot testing as well as quality control and routine auditing of ESD surfaces. The WL MIDGET is perfect for fast measurements of static dissipative and conductive surfaces. Measurements indicate decade resistance instantly and may be used to determine if additional testing is required. 9V battery operated for convenience. *Resistance range 10 *ASTM recommended parallel bar sensing *Insulator indication *Resistance to ground using lead provided *Powered by PP3 9 volt battery *Complete with PVC carrying case |  |
 | WORKSTATION/DUAL CONTINUOUS MONITOR Continually monitors 2 operators and workstation to ensure proper path to ground and static dissipation. Monitors work surface for proper ground. Monitors two single wire WRISTATS. Cleanroom compatible. No field adjustments necessary. Auto-switch activation (in banana jack). Fast response - detects intermittent connections. Three pairs of red and green audible alarm. Computer output signal. Convenient mounting bracket available. Traceable to NIST standards. CONTINUOUS MONITOR SPECIFICATIONS OPERATING LIMITS:500 Kilohms-35 Megohms WORK SURFACE LIMIT:5x108 ohms (LG1016) RESPONSE TIME:50mS LONG TERM DRIFT:3% in 50 years TEMP:10oC to 40oC |
CONTINUOUS WRIST STRAP MONITOR
Monitors any standard single wire WRISTAT. No field adjustments necessary and no wires to connect. LED and 6 second audible alarm. Traceable to NIST standards.
| SRWS-SURFACE RESISTANCE METER + WRIST STRAP CHECKER COMBINED The very first wrist strap checker and surface resistance tester in one pocket sized, battery powered, handy unit. SIZE: 140mm x 80mm x 35mm. *LOW-Fail LED below 900k ohms * Insulator indication *HlGH-Fail LED above 35 MEG OHMS (adjustable)* Resistance to ground using lead provided *Connection via 10mm stud or 4mm banana plug*Low battery indicator * Auto Power off for longer battery life * LED and audible (optional) pass indication * Powered by PP3 9 volt battery * Resistance range 103-1012 ohms* Complete with PVC carrying case *ASTM recommended parallel bar sensing*Conforms to CECC00-015/1 |  |
STATIC LOCATOR
Measures the magnitude and polarity of electrostatic fields instantly, reliably and economically. The ultra compact unit features the latest integrated circuit technology to locate and measure, by induction, electrostatic fields. The unit features one button operation and switches between ranges of +/- 500 volts and +/- 5000 volts when the meter is held 2" from a charged surface.
STATIC LOCATOR SPECIFICATIONS
VOLTAGE RANGES:X1:0 to +/- 500volts X10:0 to +/- 5000 volts
RANGE SELECTION:Two position switch
READOUTS: Voltage: Analog meter with center 0. Tricolor scale with 10 divisions for each polarity. Range:X1-Green LED; Range X10-Red LED
BATTERY LIFE:Standard 9V/one year
DIMENSIONS: Case: ABS plastic with conductive coating; Size: 3.75"L x 2.25"W x 1"D
