SR22 - Floor Cleaner   Polisher   Non-Slip
*New and improved formulation, better traction, increased friction Maximum Slip Control Properties
*Cleans, shines, increases slip resistance with "Skid Lock™" anti slip properties
*Contains no solvents or abrasives, non acid
*Non-flammable, will not burn
*Fully bio-degradable
Concentrated, all natural soap detergent for use on all flooring. Cleans, protects, shines and dramatically increases slip resistance - friction and improves traction- in one application. Use in automatic scrubbing machines or mop on. No rinsing is required. Floors may be buffed or burnished without affecting the anti-slip properties.  Actually increases the coefficient of friction on slippery surfaces. Especially recommended for high traffic areas where slip and fall accidents occur. Non-film forming coating, SR22 will not build up with repeated use.

Key Benefits

• Reduce Slip Fall Accidents
• Cleans & Polishes Floors
• Reduced Costs. concentrated 1-2 ounces / gallon of water
• Non-Acid & biodegradable.

Pricing

Slip Control Procedures using  SR22
Use on hard surface, rigid and resilient flooring (Terrazzo, Marble, Granite, Ceramic Tile, Vinyl, Conductive Vinyl, Rubber Vinyl, Vinyl Composition Tile, Cement, wood and other hard surfaces).   Mop the floor, DO NOT RINSE.

• The floor should be swept of all dirt and debris.

• Add 1 to 2 ounces to one gallon of water for normally soiled floors (estimated 4500 square feet of coverage per gallon). If heavily soiled or slippery, a higher concentration should be used.

• Using a mop or walk behind auto-scrubber, thoroughly wet the area, agitate where needed (allow for dwell time), and pick up.

• Do not rinse.  You are finished.

• To increase the shine or repair scuffs, buff the area with a white or red nylon pad or a buffing brush.

• You can spray buff using 6 ounces of SR22® to 26 ounces of water.