R20 Floor Cleaner-Polisher-Non-Slip
*New and improved formulation for normal hard surface flooring
*Cleans, shines and increases slip resistance
*Contains no solvents or abrasives
*Non-flammable, will not burn
*Fully bio-degradable
Concentrated, all natural soap detergent for use on all flooring. Cleans, protects, shines and dramatically increases slip resistance - in one application. Use in automatic scrubbing machines or mop on. No rinsing is required. Floors may be buffed or burnished without affecting the
anti-slip properties. Certified for slip resistance by Underwriters Laboratories in the recommended use dilution. Actually increases the coefficient of friction on slippery surfaces. Especially recommended for high traffic areas where slip and fall accidents occur. Non-film forming,R20 will not build up with repeated use.
Testing on polished porcelain tile by the ceramic tile resulted in a 10% to 45% increase in the static coefficient of friction depending on the shoe material and wet or dry.
Key Benefits
- Reduce Slip Fall Accidents
- Cleans & Polishes Floors
- Reduced Costs. concentrated 2-3 ounces / gallon of water
- Non-Acid & biodegradable.
Pricing
| Description | Item # | Price | Amount |
|---|---|---|---|
| R20 1-gallon | BPC8040-1 | $18.71 | $18.71 |
| R20 Case (4/1-gallons) | BPC8040-4 | $18.21 | $72.84 |
| R20 5-gallon pail | BPC8040-5 | $17.79 | $88.95 |
Slip Control Procedures using R20
Use on hard surface, rigid and resilient flooring (Terrazzo, Marble, Granite, Ceramic Tile, Vinyl, Conductive Vinyl, Rubber Vinyl, Vinyl Composition Tile, Cement, wood and other hard surfaces). Mop the floor, DO NOT RINSE.
The floor should be swept of all dirt and debris.
Add 2 to 3 ounces to one gallon of water for normally soiled floors (estimated 4500 square feet of coverage per gallon). If heavily soiled or slippery, a higher concentration should be used.
Using a mop or walk behind auto-scrubber (use 1-2 ounces), thoroughly wet the area, agitate where needed (allow for dwell time), and pick up.
Do not rinse. You are finished.
To increase the shine or repair scuffs, buff the area with a white or red nylon pad or a buffing brush.
You can spray buff using 6 ounces of R20® to 26 ounces of water. Maximum slip resistance & shine can be achieved buy burnishing as you spray R20.
